Setup with these simple steps
Mango Display setup
Login. Select ‘Add New Display’ and choose ‘Mango Display on Web Browser’ option and finish your setup. You will be provided with a unique URL for that display, you can get it by clicking the ‘view display’ button after it has been setup. We will use this URL on our Raspberry Pi browser as our display.
Raspberry Pi setup
Ensure you are running the latest Raspbian Operating system for your Raspberry Pi. Then follow the steps below.
Browser setup, hide mouse & auto start
Hiding the mouse cursor
To hide away the mouse cursor while it’s not moving, we use “unclutter”. Install it by running
sudo apt-get -y install unclutter
Autostarting everything in sequence
There are three additions we need to make to the startup sequence: Disabling screen blanking, hiding the cursor and starting Chromium in fullscreen. All these additions happen in the desktop’s autostart file. Run
sudo nano /etc/xdg/lxsession/LXDE-pi/autostart
@xset s 0 0 @xset s noblank @xset s noexpose @xset dpms 0 0 0
to disable screen blanking,
@unclutter -idle 0
to hide the cursor and
chromium-browser -kiosk https://portal.mangodisplay.com/?major=X&minor=XXXXX&macaddress=XXXXXXXXXXX
to start Mango Mirror in fullscreen. *Change the Website URL to your specific Mango Mirror URL that you got via the setup of the device on your Mango Mirror App.
The final “autostart” file looks like this:
@lxpanel -profile LXDE-pi @pcmanfm -desktop -profile LXDE-pi @xscreensaver -no-splash @xset s 0 0 @xset s noblank @xset s noexpose @xset dpms 0 0 0 @unclutter -idle 0 point-rpi chromium-browser -kiosk https://portal.mangodisplay.com/?major=X&minor=XXXXX&macaddress=XXXXXXXXXXX
Once you’ve made your changes, exit out of the nano text editor by pressing “CTRL + X”, followed by pressing “y” and “return”.
Usually you will have the Pi running without Keyboard or mouse once you have your display going. If you still need access to it, enable remote access via SSH (remote terminal) or VNC (remote desktop), open up a terminal on the Pi and run
Then head into “5 Interfacing Options” and switch both “P2 SSH” and “P3 VNC” on. Exit out with “Finish” and you should be able to connect to “raspberrypi” with an SSH client like Putty or with the RealVNC viewer for remote desktop via VNC.
If you need to rotate your screen orientation vist https://pimylifeup.com/raspberry-pi-rotate-screen/ for quick steps.
Add a motion sensor to turn the display on only when there is person nearby.
Option 1: Simple. Buy a motion controlled power outlet and connect your display monitor to it. Like this one: https://www.amazon.com/Westek-MLC4BC-Motion-Activated-Control/dp/B009KSEE4G/
Option 2: Connect a PIR motion sensor to your Raspberry Pi and do a bit of coding to turn the display on and off based on motion detection. You can find PIR sensors on amazon and many coding tutorials available online, find the on that works for you.